Gr4 Titanium hot-pressed Round Bar

GR4 products provided by GNEE

Grade: Ti-6AL-7Nb Titanium Rod

Certificate: ISO 9001:2015/EN10204 3.1 MTC/EN10204 3.2 MTC

GR4 titanium rod is an + titanium alloy: a duplex alloy with excellent overall properties, including good microstructural stability, toughness, ductility, and high-temperature deformation resistance. It can be easily hot-pressed, quenched, and aged. The strength after heat treatment is approximately 50% to 100% higher than after annealing. It has high high-temperature strength and can operate for long periods at temperatures of 400℃ to 500℃. However, its thermal stability is inferior to that of titanium alloy.

The Advantage Of GR4 Titanium Bar/Rod

1. Light weight -[Specific gravity](60% of specific gravity of steel and about 1.7 times that of aluminum)
2. Low thermal expansion-[Hermal expansion coefficent](ne-half that of 18-8 stainless steel and one-third that of aluminum)

3. Low hear conductivity-[Heat conductivity](nearly the same as 18-8stainless steel)
4. Low electric conductivity-[Electric conductivity](about 3% of copper)
5. High flexibility-Longitudinal elastic modulus](one-half of iron or stainless steel and the same as copper)
6. Non-magnetism -[Magnetic permeability](non-magnetic material; magnetic permeability=1.0001)

Titanium Tubing For Bicycle Manufacturing


Gr1	240	170	24
Gr2	345	275	20
Gr4	550	483	15
Gr5	895	828	10
Gr7	400	275	18
Gr9	620	483	15
Gr12	483	348	18
Gr23	793	759	10

	ASTM B338/ASME SB338, ASTM B337/ASME SB337, ASTM B861/ASME SB861, ASTM B862/ASME SB862,AMS4911,AMS4928
	Gr1, Gr2, Gr4, Gr7, Gr9, Gr11, Gr12, etc
	<=15000mm
	Diameter 3-114mm

	a) Outer Diameter: +/- 0.01mm
	b) Thickness: +/- 0.01mm
	c) Length: +/- 0.1mm
	Pickling, annealing, polishing, bright.
	1.Low Density and High Strength 2.Excellent Corrosion Resistance 3.Good resistance to effect of heat 4.Excellent Bearing to cryogenic property 5.Nonmagnetic and Non-toxic 6.Good thermal properties 7.Low Modulus of Elasticity


	GR1/GR2/GR3/Gr4/GR5/GR7/GR9/GR12/Gr5Eli/Gr23
	ASTM B348/ASME SB348, ASTMF67, ASTM F136, ISO-5832-2(3),AMS 4928 etc

	1-300mm,customizable
	50mm-6000mm,customizable
	h6~h13 H10~H13



	According to. EN 10204.3.1
	Metallurgy, Electronics, Medical, Chemical, Petroleum, Pharmaceutical, aerospace, etc.

	ASTM B265 JIS H4600 GB/T 3620.1
	ASTM Pure Ti: Gr.1 Gr.2 Gr.3 Gr.4 Ti Alloy: Gr.5 Gr.7 Gr.9 Gr.11JIS Pur Ti: Class 1 Class 2 Class 3 Class 4;Ti Alloy: Class 60 Class 12 Class 61 Class 11 Class 60 E GB Pure Ti:TA1 TA2 TA3 TA4;Ti Alloy: TC4 TA9 TC2 TC4 ELI
	thickness 0.3mm~100mm; Width 50mm~2500mm; Length 1000mm~12000mm

	1)Further making utensil. 2)Solar reflective film 3)The appearance of the building 4)Interior decorating:ceilings,walls,etc. 5)Furniture cabinets 6)Elevator decoraction 7)Signs,nameplate,bags making. 8)Decorated inside and outside the car 9)Household appliances:refrigerators,microwave ovens,audio equipment,etc. 10)The consumer electronics:mobile phones,digital cameras,MP3,U disk,etc.

	GR1,GR2,GR3,GR4,GR5,GR7,GR9,GR11,GR12,GR23 etc. ERTi-1, ERTi-2, ERTi-3, ERTi-4, ERTi-5, ERTi-7, ERTi-9, ERTi-11, ERTi-12
	Dia:0.1-8mm or customizable
	ASTM B348,ASME SB348,ASTM B863,AWS.A5.16,GB/T3623-2007
	10kg